2022 |
Dadi, Leila; Ethabet, Haifa; Aoun, Mohamed Set-Membership Fault Detection for Discrete-time Switched Linear Systems Conférence 2022, (Cited by: 0). Résumé | Liens | BibTeX | Étiquettes: Actuator fault, Actuators, Bounded disturbances, Cooperativity, Discrete time, Fault detection, Faults detection, Interval observers, Linear matrix inequalities, Linear systems, Set-membership, Stability condition, Switched linear system, Switched system @conference{Dadi2022190b, This work deals with Fault Detection (FD) for a class of discrete-time switched linear systems with actuator faults subject to bounded disturbances. First, based on cooperativity and stability conditions and under the assumption that disturbances and measurement noise are unknown but bounded, upper and lower bounds of the state are calculated using an interval observer. The design conditions of the observer are expressed in terms of Linear Matrix Inequalities (LMIs). Second, a fault detection decision is developed to indicate the presence of faults using interval analysis. Simulation results are provided to illustrate the performance of the proposed fault detection approach. © 2022 IEEE. |
Lamouchi, Rihab; Amairi, Messaoud; Raïssi, Tarek; Aoun, Mohamed Active fault tolerant control using zonotopic techniques for linear parameter varying systems: Application to wind turbine system Article de journal Dans: European Journal of Control, vol. 67, 2022, (Cited by: 3). Résumé | Liens | BibTeX | Étiquettes: Active fault tolerant control, Actuator fault, Actuator fault estimation, Actuators, Discrete time, Discrete time control systems, Discrete-time linear parameter-varying system, Fault estimation, Fault tolerance, Faulting, Linear parameter varying systems, Linear systems, L∞ norm, System stability, Uncertainty analysis, Wind turbine systems, Wind turbines, Zonotopic technique, ∞norm @article{Lamouchi2022g, This paper deals with the design of an Active Fault Tolerant Control (AFTC) approach for polytopic uncertain Linear Parameter-Varying (LPV) systems subject to uncertainties and actuator faults. First, a fault estimation method is developed by integrating robust observer design with zonotopic techniques. The proposed observer is developed using L∞ norm to attenuate the effects of the uncertainties and to improve the accuracy of the estimation. Then, an AFTC strategy is used to compensate actuator fault effect and maintain system stability. Finally, the effectiveness of the proposed method is demonstrated by a case study on a 4.8MW wind turbine benchmark system. © 2022 European Control Association |
Lamouchi, Rihab; Raissi, Tarek; Amairi, Messaoud; Aoun, Mohamed On interval observer design for active Fault Tolerant Control of Linear Parameter-Varying systems Article de journal Dans: Systems and Control Letters, vol. 164, 2022, (Cited by: 5). Résumé | Liens | BibTeX | Étiquettes: Active fault tolerant control, Actuator fault, Actuator fault estimation, Actuators, Discrete time, Discrete time control systems, Discrete-time linear parameter-varying system, Fault estimation, Fault tolerance, Faulting, Interval observers, Linear parameter varying systems, Linear systems, L∞ norm, State feedback, Uncertainty analysis, ∞norm @article{Lamouchi2022h, This paper proposes an active Fault Tolerant Control (FTC) scheme for polytopic uncertain Linear Parameter-Varying (LPV) systems subject to uncertainties and actuator faults. First, a fault estimation interval observer is designed to estimate the system state and the actuator fault. A novel approach is developed using the L∞ norm to attenuate the effects of the uncertainties and to improve the accuracy of the proposed observer. Then, based on the fault estimation information, the FTC strategy is designed using a linear state feedback control law and H∞ technique to compensate actuator faults and maintain system performance and stability, even under faulty conditions. Finally, the effectiveness of the proposed method is demonstrated by its application to a vehicle lateral dynamic nonlinear model. © 2022 Elsevier B.V. |
Dadi, Leila; Ethabet, Haifa; Aoun, Mohamed Set-Membership Fault Detection for Discrete-time Switched Linear Systems Conférence 2022, (Cited by: 0). Résumé | Liens | BibTeX | Étiquettes: Actuator fault, Actuators, Bounded disturbances, Cooperativity, Discrete time, Fault detection, Faults detection, Interval observers, Linear matrix inequalities, Linear systems, Set-membership, Stability condition, Switched linear system, Switched system @conference{Dadi2022190, This work deals with Fault Detection (FD) for a class of discrete-time switched linear systems with actuator faults subject to bounded disturbances. First, based on cooperativity and stability conditions and under the assumption that disturbances and measurement noise are unknown but bounded, upper and lower bounds of the state are calculated using an interval observer. The design conditions of the observer are expressed in terms of Linear Matrix Inequalities (LMIs). Second, a fault detection decision is developed to indicate the presence of faults using interval analysis. Simulation results are provided to illustrate the performance of the proposed fault detection approach. © 2022 IEEE. |
2018 |
Lamouchi, R.; Raïssi, T.; Amairi, M.; Aoun, M. Interval observer framework for fault-tolerant control of linear parameter-varying systems Article de journal Dans: International Journal of Control, vol. 91, no. 3, p. 524 – 533, 2018, (Cited by: 35). Résumé | Liens | BibTeX | Étiquettes: Actuator fault, Actuators, Closed loop systems, Convergence of numerical methods, Discrete-time Luenberger observer, Fault tolerance, Fault tolerant control, Interval observers, Linear parameter varying systems, Linear state feedback, Linear systems, LPV systems, State feedback @article{Lamouchi2018524b, This paper addresses the problem of passive fault-tolerant control for linear parameter-varying systems subject to actuator faults. The FTC, based on a linear state feedback, is designed to compensate the impact of actuator faults on system performance by stabilising the closed-loop system using interval observers. The design of interval observers is based on the discrete-time Luenberger observer structure, where uncertainties and faults with known bounds are considered. Sufficient conditions for the existence of the proposed observer are explicitly provided. Simulation results are presented to show the effectiveness of the proposed approach. © 2017 Informa UK Limited, trading as Taylor & Francis Group. |
2017 |
Lamouchi, Rihab; Amairi, Messaoud; Raïssi, Tarek; Aoun, Mohamed Actuator Fault Compensation in a Set-membership Framework for Linear Parameter-Varying Systems Conférence vol. 50, no. 1, 2017, (Cited by: 11; All Open Access, Bronze Open Access, Green Open Access). Résumé | Liens | BibTeX | Étiquettes: Actuator fault, Actuators, Closed loop stability, Convergence of numerical methods, External disturbances, Interval estimation, Interval observers, Linear parameter varying systems, Linear state feedback, Linear systems, State feedback, Unknown but bounded @conference{Lamouchi20174033b, This paper presents an actuator fault compensation approach for a class of Linear Parameter-Varying (LPV) systems with noisy measurements. The proposed method is based on interval estimation assuming that the fault vector and the external disturbances are unknown but bounded. The main idea consists in designing a control law, based on a linear state feedback, to guarantee closed-loop stability. An additive control, based on fault bounds, is used to compensate the impact of actuator faults on system performances. The closed-loop stability of the robust fault compensation scheme is established in the Lyapunov sense. Finally, the theoretical results are illustrated using a numerical example. © 2017 |
2016 |
Lamouchi, R.; Raïssi, T.; Amairi, M.; Aoun, M. Fault tolerant control in a set-membership framework Conférence 2016, (Cited by: 3). Résumé | Liens | BibTeX | Étiquettes: Actuator fault, Actuators, Bounded disturbances, Bounded noise, Control laws, Control methods, Control strategies, Fault tolerance, Faults tolerant controls, Interval observers, Linear control systems, Linear time-invariant system, Numerical methods, Set-membership, State feedback @conference{Lamouchi20161099b, In this paper, a Passive Fault Tolerant Control (PFTC) strategy for Linear Time Invariant (LTI) systems subject to actuator faults is proposed. The idea of this PFTC method is to compute a control law to cope with additive actuator faults using interval observers. The considered system is assumed to be subject to bounded noises and disturbances without any additional assumptions. The FTC is implemented as a state linear feedback control and designed using interval observers techniques. A numerical example shows the efficiency of the proposed technique. © 2016 EUCA. |